“Wi-Cell” wireless signal communications that transmits the load cell signal wirelessly to the indicator. The Cambridge indicator “thinks” the signal came through a wire. The “Wi-Cell” wireless signal communication box transmits the load cell MV/V output signal from the base to the signal input on the Cambridge indicator. The indicator “thinks” the signal wire is connected and all the indicator functions work as if a standard signal was connected. If range is an issue, Cambridge has the an-swer for that. “Wi-Cell” communication has a range of up to 450 feet using the remote antenna supplied with the system.
When not in use, the “Wi-Cell” communicator transmitter sleeps until the load fires up the system and begins transmitting signal again. The scale base can operate for 29 months under sleep mode, however a recharge is recommended every 5 months if not in continuous AC use. When and if a battery charge ins necessary, just remove the system from the scale and plus it into a 110 VAC outlet for 8 hours. If AC power is available at the location of the scale, leave the base plugged in continuous operation.

Wireless technology that truly replaces the wire! Too good to be true? THINK again!!!

“Wi-Cell” communication is battery and/or AC operated and the system can operate:
• (1) 350 OHM Load Cell up to 270 hours
• (4) 350 OHM Load Cells up to 98 hours
• (8) 350 OHM Load Cells up to 53 hours
• (12) 350 OHM Load Cells up to 37 hours